The CS-INMDM-LAN is a intelligent router that provides wireless connectivity over public 2G/3G/4G network to remote devices capable of communicating over LAN. The device is typically used for remote data acquisition / remote device monitoring and control.

It is totally transparent to the protocols used for communication between the end-points and principally functions as a gateway providing TCP/IP connectivity for the end-points. The CS-INMDM-LAN is equipped with an in-built 4G modem with fall back to 3G/2G for providing wireless connectivity and Dual SIM for high availability.

The device also has an in-built capability to monitor the wireless network connectivity (2G / 3G / 4G). Any loss in the wireless network connectivity is detected and automatically remedial measures are initiated to reestablish connectivity. A secure Web interface allows users to configure and manage the device locally or remotely. The router can also upgrade its configuration and firmware from the remote central server.

The CS-INMDM-LAN detects power outage and sends SMS to preconfigured numbers. The DC models operate from 20V to 60V DC

  • Status and data transfer LEDs provided
  • Power supply options: 20 to 60V DC
  • IP41 Enclosure
  • Dual SIM for high availability
  • Digital Input to sense power outage
  • Power outage notification through SMS
  • Remote Configuration, Software upgrade and monitoring
  • Support LTE FDD, LTE TDD, HSPA/HSPA+,UMTS, EDGE, GPRS
  • Supports connectivity to multiple devices on LAN side (via NAT)
  • Detection of loss in wireless network connectivity and automatic redial
  • Supports maximum download speed of 150Mbps in LTE FDD mode and 50Mbps Uplink in LTD FDD in 4G mode
  • Transparent gateway functionality - protocol independent with support for VPN (IPSec).
  • SCADA Systems, HMI and PLC remotely
  • Smart Grid assets(meters, switches and controllers)
  • Building automation
  • Process automation
  • Security and Surveillance
  • Remote control and monitoring
  • Solar and Wind power Intelligent
intelligent-modem
Wireless Interface
Operating Band Frequency(MHz) Mode Tx(MHz) Rx(MHz) Output Power (dBm) ±1dBm
Band 1 2100 LTE FDD/WCDMA 1920 - 1980 2110 - 2170 23.0 / 23.50
Band 3 1800 LTE FDD/GSM 1710 - 1785 1805 - 1880 23.0 / 32.50
Band 5 850 LTE FDD/WCDMA 829 - 849 869 894 23.0 / 23.50
Band 8 900 LTE FDD/WCDMA/GSM 880 - 915 925 - 960 23.0 / 23.50 / 32.50
Band 34 2100 LTE TDD/TD-SCDMA 2010 - 2025 23.0 / 23.50
Band 38 2600 LTE TDD 2570 - 2620 23.0
Band 39 1900 LTE TDD/TD-SCDMA 1880 - 1920 23.0 / 23.50
Band 40 2300 LTE TDD 2300 - 2400 23.0
Band 41 2500 LTE TDD 2555 - 2655 23.0
Data Speed
  • LTE FDD - 150Mbps Downlink and 50Mbps Uplink
  • LTE TDD - 112Mbps Downlink and 10Mbps Uplink
  • HSPA/HSPA+ - 21Mbps Downlink and 5.76Mbps Uplink
  • UMTS - 384Kbps Downlink and 384Kbps
  • EDGE - 236.8Kbps Downlink and 236.8Kbps Uplink
  • GPRS - 85.6Kbps Downlink and 85.6Kbps Uplink

Note: This is the peak speed supported by the modem. The actual speed depends on the network operator, signal strength and network congestion

  • No. of SIM - 2
  • SIM Interface - Normal SIM card with 3V/1.8V
  • Antenna - SMA type Antenna for main and diversity
  • Data Features - Standard AT Command - 3GPP TS 27.007 AND 27.005
Ethernet Port - Main and Diagnostics
  • Speed - 10/100Mbps
  • Connector - 8-Pin RJ45
  • Protection - Built-in 2KV Isolation
  • Operating Mode - Half Duplex / Full Duplex
Digital Input
  • Connector - 2-Pin Disconnection type terminal block
  • Input Range - 20 V to 30V DC
  • Input Current - <10mA
Mechanical
  • Dimension - 57mm (W) x 167mm (H) x 103mm (D)
  • IP Protection - IP41
  • Mounting type - DIN Rail
  • Weight - 900g
Power Supply
  • Input range - 20V to 60V DC
  • Connector - 3-Pin Disconnection type terminal block
  • Power Consumption - 250 mA maximum @ 24 VDC /125 mA maximum @ 48 VDC
Environmental
  • Operating Temperature - 0°C to 60°C
  • Storage Temperature - 0°C to 85°C
  • Operating Humidity - 5 - 95% RH Non-Condensing
Standards and Certification
  • Vibration - Tested as per IEC 60068-2-6
  • Environmental - Dry Heat test as per IEC 60028-2-2
    Damp Heat As per IEC 60028-2-78
  • EMI/EMC - ESD test as per IEC 61000-4-2, EFT test as per IEC 61000-4-
    Impluse test as per IEC 61180-1, Surge test as per IEC 61000
    Radio Frequency, Electromagnetic Field Immunity test as per IEC 61000-4-3
Ordering Code
  • Ordering Code - CS-INMDM-LAN-4G-DC1